Activated Charcoal Block Filter for SS Gravity

Activated carbon Block Filter for Stainless Steel Aimex Water Purifier FunctionThe water quality is enhanced by the Activated Carbon filter, which eliminates suspended particles, germs, parasites, and unpleasant taste.Test Results Component NameTest Name Inlet Value Permissible LimitMethod of Test  ResultsCarbon Block FilterChlorine Reduction Test 2.0 PPM<0.2 PPMIS-3025 Part-250.1 PPMCarbon Block FilterTaste  IS-3025 Part -8AcceptableProcedureTo prepare water with a chlorine concentration of 2.0 parts per million (PPM) using sodium hypochlorite, run 50 liters of water with 2.0 PPM of chlorine through the unit. Then, take a sample of the outlet water and perform a titration with sodium thiosulfate.Replacement of Activated Carbon BlockReplace the activated carbon block after approximately 1500 litres or four months, whichever is earlier to ensure the best filtration purification.To replace; twist and pull the existing activated carbon block from the top container, then take the new activated carbon block and twist in into connector.Specification:Base Material: Coconut ShellDimensions:  OD: 64 mm     ID: 36mm      Lenght: 73mmBlock Weight: 120 +/- 20 gramspH of Extract Water (Tap water): 7-8.2Smell and Taste: No Objectionable smell or testFlow rate: 395 ml/minChlorine Reduction: 2.0 ppm to <0.2 ppm - up tp 3000 Ltr