PLA Filament MagicFil Thermo PLA 1.75mm Grey 500 gram 3D Printer Filament

MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29 C. MagicFils anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29 C or above.Being based on our EasyFil PLA compound make MagicFil Thermo PLA a high-end easy to use impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make it an extremely easy to print filament. Unique features Colour changing ability from anthracite grey to natural PLA at 29 C Anthracite grey colour < 29 C > natural PLA colour Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable General Printing Guidelines Nozzle size:≥ 0.15mm Layer height:≥ 0.1mm Flow rate:± 100% Print temp:± 200 - 230 C Print speed:Medium Retraction:Yes ± 5mm Heat bed:± 0 - 60 C Fan speed:50-100% Experience level:Beginner Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length : 1.24 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 16.8m ± 168m Ø 2.85mm ± 6.3m ± 63m Product export information HS Code Description Country of origin 39169090 Monofilament Netherlands Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.