ATEN KVM Cable Adapter with RJ45 to DisplayPort (w/ Audio Signal) & USB to suit KM and KN series

The KA7189 KVM Adapter Cable connects a KVM switch to the DisplayPort video and USB ports of a target computer.* The KA7189 supports DisplayPort output and provides two USB plugs to connect a target computer for keyboard/mouse, Virtual Media, or Smart Card/CAC Reader functions.** The KA7189 supports Audio De-Embedder, which extracts the audio from a DisplayPort signal. More advanced features of KA7189 include the small size and lightweight design, as well as superior signal compensation and delay skew technologies for greatly enhanced video quality. *Both USB connectors must be plugged into USB ports on the target computer for the KA7189 to receive sufficient power. Note: (1) Currently, there is a compatibility issue between KA7189 and Intel HD/UHD Graphics 630. If you are planning to use KA7189 on a system with Intel HD/UHD Graphics 630, we strongly recommend that you choose our KA7188 solution with a converter solution below instead. 1. For systems with DP++ support, choose KA7188 with VC985 converter. 2. For systems without DP++ support, choose KA7188 with VC986 converter. Connects a KVM switch to the DisplayPort video and USB ports of a target computer* Supports Audio De-Embedder Auto Signal Compensation (ASC), no DIP switch setting needed for different distances Keyboard and mouse emulation keeps your server functioning smoothly when its disconnected from the switch's KVM port or is relocated to a different KVM port Virtual Media Support** Smart Card / CAC Reader Support** Superior video quality - supports resolution up to 1920 x 1200 (Reduced blanking)*** Built in ASIC for greater reliability and compatibility Compact size Firmware upgradeable Compatible With Below: KM0532, KM0932, KN1108VA, KN1116VA, KN1132V, KN2116VA, KN2124VA, KN2132VA,