ABS Filament EasyFil ABS 1.75mm Silver 50 gram 3D Printer Filament

EasyFil ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103 C Wide variety of vivid opaque colors General printing guidelines * Nozzle size:≥ 0.15mm Layer height:≥ 0.1mm Flow rate:± 104% Print temp:± 220 - 270 C Print speed:Medium Retraction:Yes ± 5mm Heat bed:± 90 - 110 C Fan speed:0-25% Experience level:Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length : 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code:39169090 Description:Monofilament Country of origin:the Netherlands