TPC Filament FlexiFil 1.75mm Red 500 gram 3D Printer Filament

FlexiFil is a rubber-like high-performance and partially bio-based flexible TPC (Thermoplastic Co-Polyester) type of 3D printer filament. FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a flexural memory, allowing objects to return back to their original position or shape after being bent, dent, or folded. Next to this FlexiFil offers a unique combination of flexibility, long term heat resistance, strength, excellent UV resistance and good resistance to chemicals. Unique features Very flexible filament with flexural memory Shore hardness of 45D High impact resistance No deformation or breaks when stressed by bending Strong durable Good resistance to chemicals Excellent UV resistance IEC 60695-11-10 Flammability classification: HB 43% renewable bio-based content General printing guidelines* Nozzle size:≥ 0.15mm Layer height:≥ 0.1mm Flow rate:± 100% Print temp:± 220 - 260 C Print speed:Low Retraction:Yes ± 5mm Heat bed:± 90 - 110 C Fan speed:50-100% Experience level:Intermediate / Expert *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length : 1.14 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 18.2m ± 182m Ø 2.85mm ± 6.9m ± 69m Product export information HS Code:39169090 Description:Monofilament Country of origin:the Netherlands Compliance* This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC