3D Printing Resin Platinum LCD Series - Solid - Resin Pack

Formfutura Platinum LCD Series is a general-purpose photopolymer LCD resin that is specifically developed to work with all open source LCD and DLP 3D printers in the range of 385 - 420nm. Our Platinum LCD resin is almost odorless and 3D prints with extremely high accuracy and a very smooth surface finish. The Platinum LCD Resin series is developed to 3D print with relatively short curing times. Key features Almost no odour - Compared to other resins on the market our Platinum LCD resin is relatively odour-free! UV weather resistant Fast printing with short curing times High-resolution 3D printing with fine detail Vivid colors with an extremely high level of colorfastness Truly opaque and translucent colors available No discoloration and/or yellowing Excellentdimensional accuracy and low shrinkage Low water absorption Compatible with all open source LCD and DLP in the range of 385 - 420nm The Platinum LCD Series - Solid - Resin Pack contains theSolid Black,Solid White,Solid Light Greyresins ( 500g each) Applications Figurines and models Functional prototyping End-use products Resin properties (uncured liquid) Viscosity: 500 cps at 25C Density: 1.18 g/cm2 Mechanical properties Test method on post cured objects through 10 minutes high power mercury curing. PropertiesTypical ValueTest Method Glass transition temperature (Tg) 51C ASTM D7028 Water absorption 0.4% ASTM D570-98 Impact strength (IZOD notched) 18 J/m ASTM D256A Tensile strength 45 MPa ASTM D638M Tensile Modulus 1000 MPa ASTM D638M Elongation at break 8% ASTM D638M Flexural Strength 66 MPa ASTM D790M Flexural Modulus 1800 MPa ASTM D2240 Shore D Hardness 82 ASTM D2240 Please note that the above-displayed values can vary with individual machine processing, post-curing parts, geometry, print orientation, print settings, and temperature. Preparation(s) before starting to print Shake the bottle for at least 2 minutes before each use. After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin The resin can be poured back from the vat into the bottle once your print is finished Always use protective measurements like safety glasses and nitrile gloves when handling resins. General printing guidelines Base Curing Times at 50 micron Translucent Black: 12sec Translucent Aquamarine: 10sec Translucent Blue: 12sec Translucent Red: 11sec Solid White: 12sec Solid Black: 14sec Solid Light Grey: 13sec Post-processing We do advise you to post-process your 3D print in order to achieve the material properties Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes An ultrasonic cleaner is preferred/recommended Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes Cure your object in a high power curing chamber for approximately 20-30 minutes at 65 C The preferred curing wavelength is between 300-410nm Safety Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets. Always wear Respiratory Protection when sanding/cutting the resin object. Always use nitrile gloves when handling resins and uncured resin objects. Product export information HS Code: 2916140090 Description:Resin for 3D Printing Country of origin:the Netherlands