TPU Filament MD FLEX 2.85mm 50 gram Dark Blue 3D Printer Filament

Copper 3D MDFlex is an innovative Nanocomposite 3D printer filament developed with a high-quality TPU 98A compound and a patented, scientifically validated and highly effective Nano-Copper additive. This unique combination of technologies brings the following characteristics to MDFlex. Key features FDA registered filament Compliant to European Union norms: No. 1935/2004 and No. 2023/2006 Antibacterial action has been scientifically validated eliminating more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms Scientifically proven effective against SARS-CoV-2 / Covid-19 with a high antiviral efficacy from 30 seconds and a viral burden reduction higher than 99% in one hour Clinically tested in prosthesis for amputees with excellent results Ideal for the manufacture of other medical applications where its dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and surgical equipment and orthopedic insoles ISO 10993 certified for skin contact Antibacterial properties confirmed by two microbiology laboratories in Chile and USA Manufactured in the Netherlands according to ISO 9001/2015 certified manufacturing standards The Nano-Additive maintains all the mechanical properties of the TPU material like strong flexibility, high heat resistance (138C), 450% elongation at break and easy to print at vel. >75mm/s. Compatible with AquaSolve for complex multi-extrusion 3D printing Applications Medical applications Food contact and processing applications Orthopedics Surgical guides and equipment Water-filtering applications Postoperative prostheses General printing guidelines * Nozzle size: ≥ 0.25mm Layer height: ≥ 0.1mm Experience level: Intermediate Print temp: ± 220 - 250 C Fan speed: 50-100% Heat bed: ± 0 - 60 C Enclosure needed: No *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting. Filament length : 1.16 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 17.9m ± 179m Ø 2.85mm ± 6.8m ± 68m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant with the below-listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.