10 Ton Porta Power Kit Hydraulic Panel Beating Car Body Dent Frame Repair Tool

1 x Hydraulic Hand Pump / 1 x Hose / 1 x 10-ton Ram / 1 x Spreader Ram / 3 x Extension Tubes / 1 x Male connector1 x Flat base / 1 x 90 Degree V Base / 1 x Wedge Head / 1 x Spreader Plunger Toe / 1 x Spreader Ram Toe1 x Flex Head / 1 x Serrated Saddle / 1 x Carry case / 1 x User ManualItem Specifications:Color: redSize:73cm*40cm*18cmN.W.:29kgG.W.:31kgLoad Capacity: 10 tonsJack Power Type: HydraulicMax Lifting Height: 130 mmCylinderMin Height:330 mmWorking Pressure: 62 MpaOil Be Filled: 500 gFor Load:Maximum load can not exceed the rated capacity.The load can not exceed the half of the capacity when all tubes used.The extension of the piston can not exceed the stroke.For Safety:Working oil:No 10Check the level of oil,if it is not sufficient,please add the same hydraulic oil.After using,close the valve with the cover,to keep the oil free from the dust and dirt.Before lifting,adjust the jack slowly to make the load coaxial with resnect to jack.Tube can not be bent,near to the catting tools and fires,also can not put te weight on it.Note before operation: