Petrol Post Driver 4 Stroke Pile Star Picket Steel Post Fence Rammer Hole

Kingtech Petrol Post Driver provides efficient and stable drilling, super impact, knocks wood posts into the ground in just seconds, perfect for driving posts and fence posts.It has a maximum power of 1000W, 4-stroke pile driver and has a high impact hammer action of 1500-2300BPM. It can drive a post, stake or nail into the ground in seconds, replacing the traditional. The piling method is more efficient and no longer has to struggle with posts, nails or stakes.This powerful tool is equipped with a new engine and when in use, it produces low noise and good stability. This  Hand-held piling machine is suitable for orchard supports, farm fences, highway guardrails, photovoltaic power stations, gardens, construction sites and other places.It includes 20-45mm, 55mm and 80mm sleeves.Features• Heavy-duty and easy-to-use post driver, designed to knock posts up to 80mm diameter in to the ground.• Powered by a lightweight, compact and powerful 4-stroke 37.7cc air cooled single cylinder engine.• Hand pull start and an oil capacity of 0.65L. Supplied complete with storage case for easy transport, as well as full tool kit.• Offers significant weight saving over other models, allowing easier single operator use and duration. Supplied with three sets of piling socket sleeves: 20-45mm, 55mm and 80mm, allowing the machine to be used with a wide range of diameter posts.• Especially useful when installing large numbers of posts, or where accessibility is restricted for heavier machinerySpecificationsEngine type: Gasoline 4-strokeDisplacement: 37.7CCFuel: Unleaded gasoline 90# or aboveOil level: 0.08LOil can capacity: 0.65LMax power and rotate speed: 1KW/6500r/minMax torque and rotate speed: 1.65N.m/5500r/minMax no-load rotate speed: 8500r/minIdle speed: 3000±250r/minFuel consumption rate: ≤480g/kW.hOil consumption rate : ≤1.2g/kW.hImpact frequency:  1500~2300BPMImpact energy: 20~45JStarter system:    Hand pull startPile specification: 20-80mmIn the Box1 x Post Driver1 x Carry Case1 x 20-45mm Driver Sleeve1 x 55mm Driver Sleeve1 x 80mm Driver Sleeve1 x Tool kit