Description
Country of manufacture: Japan
Main materials:
Body /ABS resin, adhesive layer/acrylic foam
Usage method:
Can be used on: printed plywood, tile wall and other flat surfaces
Walls that cannot be used: plaster, patterned tiles, uneven walls
Use on products with a diameter of 20mm or less.
Description:
A "pull support plate" that is attached to both ends of a pull rod to prevent it from moving or falling.
Paste the adhesive surface of the auxiliary plate to the printed plywood or tile wall to fix it
"Tall support plate stapler" = fasten the auxiliary plate to gypsum board or plywood board stapler
Both are suitable for tension rods with end diameters up to 20mm.
With alignment lines, it is convenient to install horizontally.
Tall sticks can be used in various places in the home, such as the kitchen, living room, bathroom, toilet, closet, closet, etc., but they can slip, fall, and bend depending on the wall, making it irritating.
By simply fixing it with a small "pull support plate", you can have a comfortable pull rod life with little concern of slippage or drop.
Features
- Brand Name
- KOKUBO
- Carton Height
- 120
- Carton Length
- 60
- CBM
- 0.153
- EAN
- 4956810863358